The all-new and groundbreaking SRO i-Line is a high volume production tool used for vacuum reflow soldering. Implementing this tool within the ATV single chamber approach will help to fulfil all your current and future demands. Since 1982 ATV‘s single chamber approach has proven equally successful in the R&D and pilot line production market.

With more than 550 devices in use worldwide ATV is ready to step into high volume production with its brand-new SRO i-Line. This system can easily be upgraded from the basic one process chamber version to three process chambers all within the same footprint. Each chamber is individually programmable to perform its own process. This allows for the most flexible solution within your production.

This table top soldering system is the ideal tool for R&D applications. With its rapid thermal annealing and brazing capabilities the SRO-700 is equally suited for your basic reflow soldering applications as well as all your R&D assignments. A cold wall chamber principle in combination with the IR lamp heating technology and the vacuum option will reward you with all the required process repeatability and perfect void free solder joints.

With its 100 mm clearance over the heated surface the system can handle products like IGBT and power electronics packages. The SRO-700 is an incredibly versatile reflow oven for semiconductor and MEMS application. Whatever the objective the SRO-700 is ready to handle it all.

ATV’s approach using the Cold Wall Process Chamber is also applied in the SRO-706 Getter system. This system can be applied for Thermal Getter processes in R&D and Production line applications. The basis for the Getter system is the successful SRO-706 series IR vacuum reflow oven. Common applications are sealing of packages with kovar caps or optical windows for gyroscopes, microbolometer and various MEMS sensors under high vacuum by applying thermal Getter activation.

With its proven direct IR heating approach, ATV applies for the SRO-706 Getter system a top and bottom heating. The IR lamp arrays are independently monitored and controlled as 2 separate heating zones. This results that there is an excellent heating uniformity under vacuum when reaching a maximum temperature of 450°C during the Thermal getter process. The sensor or chip temperature remains below 100°C during the getter activation process. Optionally, a mass spectrometer can be added for residual gas analysis during the sealing process.

The SRO-706 Getter is a result of in-depth cooperation with our customer base and listing to the needs of the market as you may expect form ATV.

The ATV SRO-716 series standalone IR vacuum reflow ovens are the benchmark for R&D, low volume pilot line and medium volume batch production. The system produces high quality results with outstanding process stability and repeatability. Configuration dependent, process capabilities include: flux-less soldering, eutectic die attach, gold tin soldering, void-free soldering, hermetic lid sealing, formic acid processing and flip chip soldering etc.

The Omega™ 4000 CO2 cleaning module provides powerful dry ice cleaning and surface preparation. The CO2 integrated spray is capable of quickly removing thin film, dust, and other surface contamination without damaging the part.

Uniquely designed, this compact cleaning unit comes in a stainless steel or powdercoated white frame. Test results have proven surfaces are prepared as good or better with the Omega™ 4000 than using etchants and dangerous solvents.

An optional, powerful combination of atmospheric plasma technology and integrated CO2 spray can be used to further break the bonds of tough organics. A final pass with CO2 spray removes the remaining debris, leaving a clean and high energy surface for bonding, coating, encapsulation, or under-fill processes.

The Omega™ 8000 CO₂ cleaning module is designed to operate 4 independent channels of CO₂ spray. By converting liquid CO₂ into solid CO₂ particles that are ejected out of the nozzle, it is possible to clean a wide variety of substrates. The CO₂ spray is combined with heated air propellant to form a non-condensing spray, leaving behind no residue after cleaning.

The Omega™ 8000 is configured with the SmartSpray™ process, which automatically adjusts the integrated spray, using pressure and temperature control, to maintain optimum user defined spray conditions. After being fully integrated, products don’t have to be removed, cleaned and returned to the production line, resulting in reduced human interaction, higher throughput and decreased cost-of-ownership.

OvenSENTINEL™, the latest continuous monitoring solution from ECD, sets the new standard in reflow process monitoring and product traceability. OvenSENTINEL leapfrogs competitor product to deliver unmatched measurement and visibility – down to the board and profile specification level – isolating and analyzing potentially damaging process variations. Completely customizable with user-specified dashboards, expanded sensor inputs, and flexible data extractions. OvenSENTINEL allows detailed and actionable reflow process oversight.

SmartDRY™ desiccant dry cabinet, for the storage of surface-mount technology (SMT) components with a Moisture Sensitive Level (MSL), intelligently maintains a low relative humidity (RH) as required by the IPC standard J-STD-033 while preventing electrostatic discharge (ESD) using durable electrically conductive powder paint surfaces over steel construction.

Fully network-capable with mobile connectivity and total accessibility from any networked device, ECD’s SmartDRY™ Intelligent Dry Storage technology enables compatibility with smart factory, Industry 4.0 operations.

Machine Quality Management (MQM) tools ensure soldering equipment – whether reflow, wave, or selective – is performing to specifications. Keeping a machine operating within its set tolerances sets a good foundation for product quality and high-yield operations. ECD MQM pallets use the M.O.L.E. thermal profiler as the data collection device, enabling the use of one data acquisition system that can be used across soldering equipment platforms.

Thermal profiling is the recording of time and temperature throughout a thermal process – most often to measure exposure within an oven. Used in many industries, thermal profiling collects data on a product’s thermal transformation experience, which is then analyzed to optimize complex process settings and conditions to ensure quality results.

A pioneer in the design of the traveling thermal profiler, ECD has developed a suite of thermal data logging products that serve the electronics, baking, industrial and solar industries, among others.

With a revolutionary new design, M.O.L.E.™ EV6 brings deep data collection and touch screen convenience to thermal profiling. The traveling thermal profiler allows configuration, measurement and data analysis right on the device – providing immediate actionable information, saving time and reducing the requirement for intensive operator training.

Using a familiar smartphone-like capacitive touch screen, users now have shop floor data literally at their fingertips. The six-channel M.O.L.E. EV6 integrates with all ECD RIDER™ machine quality management technologies for a truly scalable approach, made easier with visual, touch screen control.

Do you demand the highest density of thermocouple placement possible on your Hi-Reliability, High-Value PCB? ECD’s got your Spec! Do you expect a software package that flexes with your workflow, providing customizable data extractions, Imports of your .MDM M.O.L.E. libraries and compatibility with your intranet, Excel, and all ECD M.O.L.E.™ Profilers?

MEGAM.O.L.E.™ 20 delivers your specifications in a sleek 7.2mm thin package with patented productivity enhancing features that will give you the edge in R&D decision making to WOW. Management, Customers and your OEM-EMS QA linkage.