The GT-200 potentiometric titrator is a versatile allrounder that can control up to 12 burets. A 5.7 inch color LCD, operation by keypad or mouse and predefined parameter sets for various applications make the GT-200 a very easy to operate instrument.

• Separate Buret & Stirrer (just the titration part can be placed in a fume cupboard)
• Selectable Optional Printer
• Maximum 12 Burets
• Electrodes with BNC connector can be attached/detached from front side
• Numerous Titration Modes (High performance)

The new CA-310 is a convertible Karl Fischer moisture meter that can easily switched from coulometric to volumetric measurement or vice versa just by changing the titration cells. Titration cells can be connected up to 4 channels for simultaneous measurements.

The user friendly Main Controller with 8.4 Inch LCD touch screen will enable users to control and access measurement data of each cells fast and easy. The Main Controller and the Stirrer can be connected by either USB cable or wireless (option) for data communication. The lower limit of measurement range is 5μg H2O for coulometric measurement with good repeatability.

NSX-2100 – Nitrogen, Sulfur and Halogen Detector (Elementary Analyzer)

NSX-2100H/V:

• 4 different detectors can be connected to 1 furnace depending on your requirement
• High end performance, robustness, reliability, stability
• Ultra trace sulfur (Vertical Furnace)
• Open/Close furnace for daily maintenance

Chlorine:

Coulometry

• S, F, Cl, Br, I: Ion Chromatography (AQF)

Nitrogen:

Chemiluminescence

Sulfur:
UVFL, Coulometry

• High productivity, low running cost
• Easy daily maintenance
• Unique option
• Modularity, flexibility

Accurate and Quick Measurement of Materials’ Resistivity

• Low Resistivity Meter (Measurement Range 10-4 -107Ω)
• Intelligent resistivity meter equipped with 4-pin adjustment factor calculation software.

Uses

Production engineering Quality Control R & D

Applications

Conducting coatings, inks and pastes; galvanizing; conductive plastic rubber; metallic membrane, ITO thin film, electrode materials

The SP2000 analyzers automate all manual handling steps in the procedure of an application such as sample dilution, capping / de-capping, liquid handling, mixing, addition of reagents etc. Skalar has automated the following applications:

• Biochemical Oxygen Demand (BOD)
• Chemical Oxygen Demand (COD) according to ISO 6060
• Test kit applications including ST-COD according to ISO 15705, pH, Conductivity (EC), Alkalinity, Acidity, Hardness, Carbonate / Bicarbonate and other titrations, Turbidity and Color, Ion Selective Electrode (ISE) measurements
• Particle size distribution analysis in soil
• Bitterness and other parameters in beer/wort
• Sample preparation techniques (filtration, distribution, pipetting etc.)

Boost Efficiency of Your Current Compound ID

The new Spectra Analysis DiscovIR System is the perfect solution when identifying the components in a complex mixture. Infrared spectroscopy provides each compound’s unique fingerprint, making it quick and easy to identify each peak by comparison to the extensive solid phase IR libraries. The DiscovIR system is particularly useful in identifying structural isomers, which can be a challenging area for Mass Spectrometry.

Micro-deposition Improves Analysis

DiscovIR’s unique temperature controlled, vacuum deposition method ensures that results are accurate and reproducible. Eluted peaks are first deposited in a film onto a rotating IR-transparent disc. The disk rotates the concentrated spot into the infrared beam and the spectrum is collected.

Drug exhibits have become more challenging over the years due to an increase in complex synthetic substances with many positional isomer and diastereomer possibilities. With the DiscovIR-GC® from Spectra Analysis Instruments, forensic and law enforcement labs can now easily and rapidly identify designer drugs, by-products, and cutting agents with a higher level of specificity and discrimination which is unattainable through mass spectrometry alone.

Key Applications

• Controlled substances
• Amphetamines
• Diastereomers
• Ephedrine/pseudoephedrine
• Trace analysis
• Fentanyl analogs
• Cathinones
• Phenethylamines

Dilatometry measures the change in size of a sample as a function of temperature. In addition to directly determining the thermal expansion of the sample, the change in size also provides information about phase transitions and physical or chemical changes in the microstructure. These can be identified by the associated changes in density and rate of expansion of the material. Dilatometry is also an extremely useful method for evaluating the sintering behavior of materials, as it records both the shrinkage of a sintered sample and the temperatures required to achieve this change. This analysis allows optimization of workpiece shapes and processing temperatures, improvement of product quality and reduction of costs.

Key Features

• Patented, linear motor and high-resolution displacement sensor provide unmatched control over the widest ranges of force, displacement, and frequency, for superior data accuracy
• Ultra-durable, frictionless motor, backed by the industry’s only ten-year warranty, provides maintenance- and worry-free operation
• High force of 500 N enables testing of larger samples or final parts under real-world conditions, by achieving higher loading levels in both DMA and fatigue analysis
• Forced Convection Oven (FCO) provides superior control and responsiveness over a temperature range of -150 °C to 600 °C for the highest degree of accuracy and flexibility in experiment thermal profiles
• Large Sample Oven (LSO), with a temperature range of -150 °C to 315 °C, offers spacious interior dimensions to accommodate testing of large samples or component
• Air Chiller Systems (ACS) offer unique gas flow cooling for sub-ambient testing without the use of liquid nitrogen, eliminating potential laboratory hazards while providing an incredible return on investment
• Broad range of fixtures accommodate a wide range of sample sizes and geometries adding to testing versatility
• Extremely rigid test frame and air bearings ensure the most accurate results on samples of very high stiffness
• Multi-color status lights provide clear and visible indication of instrument and test status
• WinTest^® and TRIOS Software packages provide powerful and easy-to-use instrument control and data analysis for the ultimate flexibility in experimental design